How To Remove Dresser Drawer With Center Metal Slide (6 Steps)

When it comes to removing the dresser drawer with center metal slide, it’s necessary to have all important tools to do the job with ease. Dresser drawer can get stuck with center metal slide because of several reasons. Maybe, your drawer is so old and debris is everywhere. And it’s time to call a plumber (or DIY the job.) 

There are 6 easy steps to remove dresser drawer with center metal slide. We’re going to describe these. Let’s look at a glance. 

6 Steps To Remove Dresser Drawers With Center Metal Slides: 

Here I am showing you 6 practical solutions which can help you remove your stuck drawers. I hope you are ready to read from top to bottom to choose the better solution for you.

 Step 1: Inspect The Drawer Slide: 

First of all, you should inspect the drawer slide to enhance the Release Mechanism. You must check it properly to ensure there isn’t one. Observe very well and make sure it is a center mount slide. If the dresser has dual metal slides on each side, use two easy pushes to under-mount the drawer slides to release the levers.

But your drawer comes with epoxide slides designed with a bottom mount, and then you simply remove the drawer by lifting the dresser drawer when it extends. The side-mount ball-bearing drawer slides have double-release levers that become visible whenever the drawer opens fully. You push one up and the other down, then pull.

 Step 2: Find Out The Pull-Out Guard Of The Drawer:

Now Find out the pull-out of the drawer to make the removing process easy. If fully extended, the plastic flap of the dresser hits the bottom back of the drawer. 

In this case, be careful and find out the pull-out guard of the drawer. And then, it will make the removing process of the drawer.

Step 3: Engage More Pressure To Pull Out The  Old Drawers: 

Since force is needed to pull out the old dresser drawers, no one would like to break a drawer. If the metal track uses a plastic guide, there are chances that the guide will break.

When trying these steps, please be always careful so you don’t pinch, slam or get yourself hurt, or damage the drawer. If you apply excessive force, drawers that have no dovetail joinery can break off easily.

Try to gently increase the force you applied to the dresser drawer so you can check if it will unstick.

Step 4: Remove The Drawers One After Another:

Try another driver if you fail. Sometimes, if you want to learn what the trick might be, try to mix things up and remove the dresser drawer. Perhaps, the drawer you want to remove is the broken drawer.

Step 5: Inspect  Slide Side To Identify The Faulty Drawer: 

Check out if something is broken and create a rigid hard block. In as much as you can’t view the slide, use a putty knife and a drawer side that is fully open to run each side of the track. 

When testing, make sure you test on a removable drawer and the drawer you can’t remove. Take thorough inspection for signs of visible damage in the slide; if you can access the back, attempt to remove the dresser drawer slide.

You can apply excessive force to repair the dresser drawer later. This repair needs to be done at your discretion.

Step 6: Call A Professional To Get Help: 

If all the steps above didn’t get you the right results, this means that the mounting hardware is seriously damaged. Perhaps, it can break seriously. If you face such a challenge, I recommend you to get a professional to remove the drawer.

Hopefully, you’ve got the point now. So try to remove the dresser drawer with a center metal slide. If you face any problems, then comment below. 

Why Do Your Dresser Drawers Get Stuck?

In my view, there are 5 reasons why your dresser drawers get stuck with a center metal slide. But, in a very urgent situation, you notice that and get into trouble with that. 

Anyway, you need to know these to make your life easier. 

1. Check The Old Drawers: 

For the time being, metal parts of the drawers tend to rust when it gets older. As more dust accumulates, the drawer faces the problem of not gliding in and out as it usually does.

There is no exact way of fixing a drawer that starts to rust. You can get a temporary solution by replacing the drawer or any other hardware.

2. Broken Mountain Hardware:

The mounting hardware may malfunction as a result of faulty components. For example, screws may become loose, which will cause pieces of parts to break off. 

In case you come across problems of this nature, you should replace the mounting hardware this time.

3. Humidity:

The weather conditions like humidity may be a sufficient cause which can make the drawers stuck. Changes due to moisture in the air can cause wooden drawers to swell. Because of this swell, they may not align perfectly with the dresser interior, which will cause them to get stuck.

Drawers stuck as a result of humidity in the air are more comfortable to remedy. You should apply lubricant to the sides of the dresser drawer to help it glide smoothly again.

4. Accumulation Of Debris:

Debris-like bits and pieces may pile up in the drawer slides over time. Much of this kind of debris are small pieces and bits which usually get stuck in the drops and may prevent the drawer from moving smoothly.

So, if you have a drawer with a center metal slide before you think of ripping your drawer apart, you should read this article carefully to learn how to Remove the Dresser Drawer with the Center Metal Slide.

5. Need To Transfer Some Tools: 

It also may happen that all are ok, but you have to transfer some documents or tools, or you have to move the closet or cabinet itself. That time you also need to remove the drawers to make the transferring process easy. 

How to Remove Drawers With Stops?

Completely pull the drawer and then press the button or lever. After that, gently remove the drawer effortlessly.

How Do You Remove An Under-Mount Slide Drawer?

Pull the drawer out to the point where the slide mechanism comes to a complete stop. Search for track levers, typically in the center of the track. Press both hand levers simultaneously. Hold the levers and pull the drawer the way out.

How Do You Remove Desk Drawers With Metal Glides?

Pull the drawer until you reach the mid-lever. Then push the mid-lever, and efficiently you can remove the drawer.

How Do You Remove Old Accuride Drawer Slides?

Friction is straightforward. Just pull the drawer far enough to separate the drawer from the cabinet, and the slides will disconnect. In the end, ball retainers will have some resistance, but by design. (The drawer would fall otherwise.)

How Do You Remove Dresser Drawers That Won’t Come Out?

First, empty your drawer. This step facilitates removal. Pull the drawer open to the extent possible, and the guides fully extend. See if there’s a clip or locking lever on the drawer guides. Pull the drawer out until it’s entirely off the rails.

How Do You Remove Drawers From A Metal Filing Cabinet?

One hand should be outside of a cabinet, pulling it inward, while the other raises the drawer’s rim. By pressing inwards and upwards, the drawer from the metal slide must detach.

How Do You Remove Runners From Kitchen Drawers?

Extend the drawer runners as far as they go to remove the drawer. Then, on the drawer side, remove the gray covers to reveal drawer adjustments. Just raise the levers on either side and pull the drawer forward, as shown. Then push the runners back in.

Ending Speech:

After the above discussion, I want to thank you, especially for being with me till the end. I hope you are clear now with the removal process of the different types of drawers. We expect your opinion in the comment box. Thanks.

Leave a Comment