For most Do It Yourself persons, it is common to have a wench. It is because the basin wrench is easy to operate, inexpensive, and does a myriad of useful jobs. But what if you don’t own a basin wrench and need to remove the kitchen faucet for repairing or fixing?
Is it even possible? Yes, it’s very much possible to remove the kitchen faucet without a basin wrench if you know how to do it- rightly.
In today’s in-depth tutorial, we are going to describe you to remove the faucet from the kitchen sink without the help of a basin wrench.
So, are you up for it, bud?
Removing the Kitchen Faucet Without Using A Basin Wrench
Our longtime experience in the plumbing sector has taught us a thing- most people think that removing a kitchen faucet is a complicated and tricky task. Sadly, they aren’t right.
With a simple DIY project, you can take off the kitchen faucet pretty straightforwardly. In today’s educative article, we are going to present to you the most straightforward way on how to remove a kitchen faucet without a basin wrench.
Let’s start, then.
If you want to remove the faucet without a basin wrench, you will need the following items.
- Channel-lock pliers
- A socket wrenches
- A screwdriver
- A gauge of tape
- Towel or clean cloth
Once you are ready with the things, it’s time to start the DIY project.
Turning Off the Valve
Likewise, for any plumbing work, you need to turn off the water supply source. Doing it will ensure that you won’t end up flooding your kitchen room. This is a precautionary measurement, and you mustn’t skip it. Furthermore, place a medium bucket underneath the kitchen sink or faucet, even if some remaining water comes out.
Make sure you have turned off both the cold and hot water sources. These are mainly located beneath the sink.
Opening the Faucet
Since there’re will be no water in the valve, it may be filled up with air pressure. It will hamper your work in the later parts. So, it would help if you released the pressure bubble from the faucet.
You can do it by opening the faucet. Once you open it, keep it the same way for 2-3 minutes. By this time, the valve should release the pressure and be free for convenient work.
Disconnecting the Water Line
The previous two steps were straightforward, and you probably didn’t have to work much for it. But now things will get a bit tricky. But don’t worry, we will make the simple for you.
At this time, you will need to disconnect the water line for the kitchen faucet. In this case, we recommend you use the channel lock pliers.
Use the pliers to attach the water line tightly and then pull them off carefully. Make sure that you don’t mess up the process to damage the water lines and the faucet itself.
Removing the Nuts or Screws
Once you have successfully disconnected the nuts or screws from the kitchen faucet, you will need to remove the screws. To remove the nuts, you may use the socket wrench. Attach the wrench with the screw and move it in the counterclockwise direction to remove the screws one after another.
However, sometimes the nuts may be attached too tightly to the faucet. It happens if the screws haven’t been maintained or replaced for a long time. In this case, use grease to soften the nut joints. Then, use the multipurpose socket wrench to remove the nuts.
Disconnecting and Removing the Hose
After removing the screws successfully, store them in a secure place. Then start to disconnect the hose from the sink. And lastly, wipe out the faucet and inspect it.
If you see any defects, you may need to fix it before you can reuse it. Or, you can also use a new one. However, if you wish to use the old one, use water and a piece of clean cloth to wipe out all the debris from the faucet.
A basin wrench is a crucial plumbing tool. But that doesn’t mean that you can’t use alternatives in case you lack a basin wrench.
The process mentioned above should be easy enough to inspire you to remove and replace the kitchen faucet without using a basin wrench. And once you accomplish the mission, don’t forget to tell us how it felt.
Your opinion means a lot to us.