Different Sink Drain Removal Techniques

  • By: Peter Allen
  • Date: 06/27/2021
  • Time to read: 3 min.

Any homeowner would realize the importance of a properly functioning sink drain. Once it stops working, your kitchen and bathroom sink, in particular, will face a myriad of problems.

At this time, you must remove the sink drain flange or stopper, and replace it with a new one to keep the sink continuing its performance.

In this article, you will get-

  • A life hack to remove the bathroom sink drain flange.
  • An effective way to remove the kitchen sink drain.
  • A useful way to remove the American Standard bathroom sink drain stopper.

So, let’s dig deep into the matter.

How To Remove Bathroom Sink Drain Flange

To remove a bathroom sink drain flange, you will need the following things.

  • Bucket
  • Pliers
  • Adjustable wrench

Once you are ready with all the arrangements, the rest of the removing job is pretty straightforward. You will require to understand the following steps.

1. Reach the back of the sink and turn off the water faucet.

2. Place a bucket underneath the sink to collect any possible water drippings.

3. Use a quality wrench or screwdriver to unfasten the screws. The screws, in general, hold the P-cap and tailpiece together. After unscrewing, disconnect both of the parts.

4. Now, use the screwdriver to loosen the tailpiece from its drain flange. At this state, be cautious not to damage the tailpiece and drain flange.

5. Hold the drain flange firmly, as you remove the tailpiece by twisting it.

6. Once you remove the tailpiece, could you keep it on one side?

7. Lastly, hold the drain flange firmly and look if it comes automatically. In most cases, the drain flange is attached with putty.

8. You may additionally need to use a plier to hold the flange and pull it off from its original position.

Once you have removed the bathroom sink drain flange, you can replace it with a new one. You will only need to use silicone caulk underneath the drain flange for strengthening.

After that, you can put the new drain flange and screw it.

How To Remove Kitchen Sink Drain

If the stopper of a kitchen sink stops working, you need to replace it. However, replacing the kitchen sink drain at first requires you to remove the old one.

Here, I am going to describe the most convenient way to remove the kitchen sink drain.

1. Firstly, you need to free the underneath storage of the cabinet for creating a convenient workspace.

2. Turn off the supply water faucet to stop the overflow.

3. Use a lubricant into the drain flange and let it soak for the suggested time.

4. Now attach a plier with the coupling nut. It is commonly located on the top of the pipe.

5. Now turn the plier counterclockwise to loosen the nut.

6. After that, disconnect the drain flange from the drain pipe.

7. Once you untightened the coupling nut, pull out its drain line from the flange. Be cautious not to damage the drain with the plier.

8. Now use another screwdriver to unlock the nut from the flange.

9. Lastly, tap the underneath of the sink to loosen the drain flange and remove it.

That’s it, and you have successfully removed the kitchen sink drain flange.

How To Remove Bathroom Sink Drain Stopper American Standard

Sometimes, the American Standard drain stopper may stop functioning that makes the drain work slowly.

In this case, firstly, you need to remove the American Standard bathroom sink drain stopper. Thankfully, the process is pretty straightforward.

1. At first, thread the cable connector to disconnect the drain from the cable.

2. Use a quality screwdriver on each side of the cam cap to remove it. You may also use your fingers to pry it, but that leaves you with the risk of injuring yourself.

3. Now pull the cam straight. At this time, wiggle the cam mildly to remove the seal from it.

4. Lastly, lift the stopper from the drain pipe and remove it.

Isn’t it simple? So, next time you face difficulty with the stopper removal, follow these steps for convenience.


From time to time, the bathroom or kitchen sink drain may stop working. At those times, you may need to replace it, which requires removing the drain stopper or flange at first.

We aspire that these life hack techniques will come in handy for your removal of the kitchen sink or bathroom drain flange at ease and conveniently.

Leave a Reply

Your email address will not be published. Required fields are marked *

How to Block A Bathtub Drain Without A Plug

Previous Post

Different Ways To Stop Bathtub From Draining

Next Post

How to Install a Bathroom Exhaust Fan on the First Floor

How to Install a Bathroom Exhaust Fan